Link-systems OmniLink 5000 Bedienungsanleitung PDF herunterladen (Seite 93)

7.1

Section 7 Installation

Section 7.1 Component Mounting

The Operator Terminal must be mounted in a position that is easily seen and accessed by the operator.

The liquid crystal display is designed to be viewed from the bottom of the display. If the operator terminal

is mounted in a vertical plane, it must be mounted slightly above the operator's eye level. If mounted on

a sloped surface, it should be mounted so that the operator's line of sight is from the bottom of the LCD.

The desirable orientations are shown in Figure 7.1.

Figure 7.1 LCD Mounting Orientations

The required cutout dimensions for the operator terminal are shown in Figure 7.2.

Figure 7.2 Operator Terminal Mounting Dimensions

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 114 115

Keine Kommentare

Link-systems OmniLink 5000 Bedienungsanleitung Seite 93