Link-systems LinkNet II Bedienungsanleitung PDF herunterladen (Seite 20)

• Scrap - The portion of material that ideally would have been a good part, but due to some

defect is not usable. For instance, if a punch in the die breaks, one or more parts

may be made missing a hole. These parts are scrap (unless they can be

reworked).

• Tool - A device used to shape or to perform work on material. For stamping, it is

usually called a die and consists of an upper portion attached to the slide of the

press and a lower portion attached to the bolster of the press. Note that in some

cases more than one tool may be used in a single stamping operation.

• Machine - A machine, as used in LinkNet, is the equipment (typically, but not always, a

stamping press) on which Link products with networking capability are used to

collect information.

• Job - A job, as used by LinkNet, represents a manufacturing process that brings

together a machine, one or more tools, and material to produce a part. Figure 3.2

demonstrates the relationship between these items.

Machine

Number

Capacity

Etc.

Tool 1

Part

Material

Job

Machine Number

Material Number

Tool Number

Part Number

Press Control Settings

Tonnage Monitor Settings

Die Protection Settings

PLS Settings

Auto-Setup Settings

Etc.

Tool 2 (If Applicable)

Figure 3.2: Relationship Between Machines, Tools, Material, Parts, and Jobs

Manual Version 1.1 10/28/2001

3.2

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 98 99

Keine Kommentare

Link-systems LinkNet II Bedienungsanleitung Seite 20