Link-systems System 1100 Tonnage Monitor Bedienungsanleitung PDF herunterladen (Seite 116)

ERROR CODES

___________________________________________________________________

Error No. Message / Action

10-13

117 Data window 4, channel 2 low setpoint too high.

118 Data window 4, channel 3 low setpoint too high.

119 Data window 4, channel 4 low setpoint too high.

The Data window 4 low setpoint of the channel

indicated by the error code is set to a value

greater than 125% of the channel rating.

1) Check the MACH RATING setting in the Config menu

for correctness.

2) Adjust the indicated setpoint to a setting less

than 125% of the channel rating.

120 Data window 4, channel 1 reverse setpoint too high.

121 Data window 4, channel 2 reverse setpoint too high.

122 Data window 4, channel 3 reverse setpoint too high.

123 Data window 4, channel 4 reverse setpoint too high.

The Data window 4 reverse setpoint of the channel

indicated by the error code is set to a value

greater than 125% of the channel rating.

1) Check the MACH RATING setting in the Config menu

for correctness.

2) Adjust the indicated setpoint to a setting less

than 125% of the channel rating.

124 Data window 4, chan 1 high setpoint < low setpoint.

125 Data window 4, chan 2 high setpoint < low setpoint.

126 Data window 4, chan 3 high setpoint < low setpoint.

127 Data window 4, chan 4 high setpoint < low setpoint.

The Data window 4 high setpoint of the channel

indicated by the error code is set to a value less

than the low setpoint.

1) Adjust the high or low setpoint so that the high

1 2 ... 111 112 113 114 115 116 117

Keine Kommentare

Link-systems System 1100 Tonnage Monitor Bedienungsanleitung Seite 116