Link-systems OmniLink - PLC Interface Bedienungsanleitung PDF herunterladen (Seite 39)

June 5, 2000 Man ual Rev 1 .0 5.12

Value:

Standard Numeric

Meaning:

Non-Zero if Clutch is engaged. This basically tells the PLC when the press is actually stroking.

Section 5.7.24 Parameter 024 - Crankshaft Direction of Rotation

Value:

Standard Numeric

Meaning:

0 for forward rotation. Non-Zero for reverse rotation.

Section 5.7.25 Parameter 025 - Stop Time Limit (Top)

Value:

Standard Numeric

Meaning:

The stopping time limit of the press in milliseconds for stops at the top of the stroke. See Press

Control Manual for more information.

Section 5.7.26 Parameter 026 - Stop Time Limit (Not at Top)

Value:

Standard Numeric

Meaning:

The stopping time limit of the press in milliseconds for stops NOT at the top of the stroke.

Section 5.7.27 Parameter 027 - Start Time Limit

Value:

Standard Numeric

Meaning:

The starting time limit of the press in milliseconds.

Section 5.7.28 Parameter 028 - Last Stop Time

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 52 53

Keine Kommentare

Link-systems OmniLink - PLC Interface Bedienungsanleitung Seite 39